DEV-SYSTEM JNX42 (3xUSB3.2,CAN,Remote via SMS)

Description

The JNX42 Developer System packs maximum connectivity into the smallest possible form factor. The JNX42 carrier board (80 × 104.6 mm) was designed from the ground up for the native three USB 3.2 ports and three PCIe buses of the NVIDIA Jetson Orin—without compromising bandwidth or latency. Two MIPI CSI-2 interfaces, each with 4 lanes, enable the simultaneous operation of high-quality industrial or automotive cameras, compatible with Raspberry Pi modules, ArduCam, Basler, Allied Vision, and other common sensors.

The CAN bus with TJA1051 transceiver connects the system directly to vehicle and machine networks according to ISO 11898—without the need for an additional CAN adapter. The optional M.2 Key B slot supports LTE/5G modules (dual Nano-SIM), which, in combination with a UART connection to the MCU, enable remote management: watchdog function, power cycling, changes to the boot order, and system control independent of the Linux operating system—even if the system no longer boots.

Pre-flashed with JetPack 6.x (CUDA, TensorRT, DeepStream) and includes a power supply—ready to get started right away.

TECHNICAL SPECIFICATIONS

• Module: NVIDIA Jetson Orin Nano 8GB | Orin NX 16GB (selectable)
• AI Performance: Nano 8GB: 40 TOPS | NX 16GB: 100 TOPS
• Memory: Nano 8GB: 8 GB LPDDR5 | NX 16GB: 16 GB LPDDR5
• Carrier Board: JNX42-M2 (Designed & Manufactured in Germany)
• Ethernet: 1× 1GbE (RJ45)
• USB 3.2: 3× native (10 Gbit/s, with Orin NX)
• USB 2.0: 1× Micro OTG + 2× Type A
• CSI-2 Ports: 2× 4-Lane (22-pin) – industrial camera standard
• M.2 Key M (NVMe): 1× 2280 – pre-flashed 128 GB (JetPack 6.x)
• M.2 Key E (Wi-Fi/GPS): Optional (PCIe x1 + USB 2.0, 2230 form factor)
• M.2 Key B (LTE/5G): Optional (3042/3052, Dual Nano-SIM)
• SIM Card Slot: 2× Nano
• PCIe Expansion: 1× FPC 22-pin
• HDMI: 1× 2.0 (4K@60Hz)
• CAN: 1× (TJA1051 Transceiver)
• UART: 2× (1× when LTE module active)
• I2C / I2S / SPI: 3× (3.3V) / 1× (1.8V) / 1× (1.8V)
• MCU / Watchdog: ✓ – Remote management via LTE SMS
• Crypto Chip: Optional
• RTC Battery: Optional (rechargeable)
• Board Dimensions: 80 × 104.6 mm
• Power Supply: 12V (12–48V with expansion module)
• Cooling: Heatsink + fan (active)
• Operating System: JetPack 6.x (pre-installed, CUDA, TensorRT, DeepStream)

Each developer board comes with access to a trial license for Iron Link — our performance vision software for computer vision, powered by hardware accelerators such as PVA, VIC, or CUDA. Are you a board developer? Request your personal Iron Link trial license and explore the full potential of accelerated computer vision on your hardware.

Learn more & request your license at: https://rebotnix.com/ironlink

AI Software & Solutions
From board to finished application: REBOTNIX offers individual board customizations, tailored AI software, and enclosures made of aluminum or plastic with custom enclosure branding for orders of 25 units or more – all from a single source, precisely tailored to your needs. Get in touch with us!